A deferred expense is a cost you have already been billed for but have not yet used, such as a year of insurance paid in advance. It sits on the balance sheet as a current asset and moves to the profit and loss statement month by month as the service is received. In Odoo 19 you record it by entering a start date and an end date on the vendor bill line; Odoo then moves the amount to a deferred expense account and posts the monthly recognition entries for you. Deferred revenue is the same mechanism on a customer invoice, with a current liability account.
This guide covers both, in the order you would set them up. Odoo's behaviour below comes from the Odoo 19.0 documentation pages on deferred expenses and deferred revenues, and two sections of the year-end closing page, all read on 10 November 2026. Where a point is our own inference and not Odoo's statement, the text says so.
Deferred expense and deferred revenue side by side
The two features share their settings and their logic. Only the document, the account and the direction change.
| Deferred expense | Deferred revenue | |
|---|---|---|
| Also called | Prepayment, prepaid expense | Unearned revenue |
| Document | Vendor bill | Customer invoice |
| What happened | You were billed before receiving the goods or service | You invoiced before delivering the goods or service |
| Balance sheet account | Current asset | Current liability |
| What recognition does | Moves the amount from the deferred account to the expense account | Moves the amount from the deferred account to the income account |
| Odoo's own example | One year of insurance paid upfront | A one-year software licence invoiced immediately |
Source: the two Odoo 19.0 documentation pages linked above.
Two things a deferral is not. It is not an accrual, which records a cost or income before the document exists. And it is not a fixed asset: equipment you will use for years is depreciated, which Odoo handles in a separate feature. A deferral is for a service period with a start and an end.
Step 1: Set the four deferral settings
Go to Accounting → Configuration → Settings. The documentation lists the same four options for expenses and for revenues:
- Journal. The journal in which deferral entries are posted.
- Deferred Expense and Deferred Revenue accounts. Odoo describes the first as a current asset account and the second as a current liability account. Check the account type of whatever accounts your chart proposes, because the type decides where the balance appears on the balance sheet.
- Generate Entries. The default creates the entries when the bill or invoice is validated. The alternative is Manually & Grouped.
- Based on. The calculation basis: Days, Months or Full Months.
The last two are accounting-policy decisions. Have the person who signs the accounts take them, and record the choice, before the first deferred document is posted.
Step 2: Choose the calculation basis
Odoo illustrates the three methods with a single figure, $1200 deferred over 12 months (Odoo 19.0 deferred expenses):
| Based on | How Odoo splits the amount | Odoo's illustration | Suits |
|---|---|---|---|
| Days | Evenly over every day of the period, start and end dates included | About $102 for January, about $92 for February | Contracts where the daily cost is the agreed basis |
| Months | An equal share for each full month, whatever its length; a part month is prorated by days | $100 a month; $50 for the first month if the start date is the 15th | Reporting that should show the same charge each month, with honest part months |
| Full Months | Any month that has started counts as a whole month; the last month counts fully only if the period runs to its final day | The full $100 in the first month even when the start date is the 15th | Simple schedules where a mid-month start should not create a remainder |
Source: Odoo 19.0 documentation, Deferred expenses, Configuration; the deferred revenues page gives the same figures.
The difference between Months and Full Months shows up with mid-month starts. Odoo notes that under Full Months there is no need for a thirteenth month to recognise a remainder, which is what Months produces when a twelve-month period starts on the 15th.
Step 3: Choose how entries are generated
| On invoice/bill validation | Manually & Grouped | |
|---|---|---|
| When entries are created | When the document is validated | When someone clicks Generate Entries on the deferral report at month-end |
| Number of entries | A set of entries per deferred document | Two per month in total: an aggregated entry and its reversal |
| Traceability | Each bill or invoice has a Deferred Entries smart button | Per account, through the report and its journal items |
| Month-end work | Review only | A step someone must perform every month |
| Suits | Most companies; a moderate number of deferred documents | A high volume of deferrals where per-document entries would flood the journal |
Source: the "Generate deferral entries on validation" and "Generate grouped deferral entries manually" sections of the Odoo 19.0 deferred expenses page.
Our recommendation is to start with the default.
Step 4: Record a deferred expense on a vendor bill
- Create the vendor bill as usual, with the normal expense account on the line. You do not select the deferred account on the bill; by our reading of the documentation, Odoo takes it from the settings.
- In the Invoice Lines tab, make the deferral date fields visible if they are not. Odoo's tip is to make sure the Deferred Date field is displayed.
- On each line to defer, enter the start date and the end date of the period the cost covers. By our reading, lines without dates are expensed in full, so a bill can mix deferred and immediate lines.
- Keep the start of the period in the same month as the bill's accounting date. Odoo states that the deferral period should usually start in that month, because entries are posted from the accounting date and the report displays them on that basis.
- Confirm the bill. With the default setting, Odoo generates the deferral entries at that moment.
- Open the Deferred Entries smart button on the bill and read the schedule before moving on.
Step 5: Record deferred revenue on a customer invoice
The steps are the same on a customer invoice: the usual income account on the line, a start and an end date on each line to defer, the period starting in the month of the invoice date, then confirm and review the Deferred Entries smart button.
Which invoices to defer is a revenue-recognition question for your accountant, not an Odoo setting. Odoo applies whatever dates the line carries.
What Odoo posts, using its own example
Odoo's example is a January bill of $1200 deferred from 1 January to 31 December (Odoo 19.0 deferred expenses). With entries generated on validation, the documentation describes two kinds of entry:
- The first entry is dated on the bill's accounting date and moves the amount from the expense account to the deferred account. After it, the profit and loss statement shows nothing for this bill and the balance sheet shows the whole amount as an asset.
- The following entries move the amount back from the deferred account to the expense account month after month. In Odoo's example, $800 has been recognised as an expense by the end of August and $400 remains on the deferred account (source: the same Odoo 19.0 page, "Generate deferral entries on validation").
Our reading of Odoo's Draft-to-Posted note is that future entries wait as drafts and are posted when their date arrives. Odoo notes that the server checks once a day whether an entry must be posted, so the change from Draft to Posted can take up to 24 hours.
The grouped mode: a month-end routine and entries that look odd
With Manually & Grouped, nothing is generated when you confirm a document. At the end of each month, someone opens the deferral report and clicks Generate Entries. Odoo then creates two entries:
- one dated the last day of the month that aggregates, per account, the deferred amounts of that month;
- its reversal, dated the first day of the following month.
Odoo's worked example uses three bills, based on Months: bill A of $1200 and bill B of $600, both deferred from 1 January to 31 December, and bill C of $600 whose period has not started (Odoo 19.0 deferred expenses).
| Entry | Expense account | Expense account | Deferred account |
|---|---|---|---|
| 31 January | -2400 (cancels the total of all three bills) | 150 (one twelfth of bills A and B) | 2250 (still to be recognised) |
| 1 February (reversal) | 2400 | -150 | -2250 |
| 28 February | -2400 | 300 (two twelfths of bills A and B) | 2100 |
| 1 March (reversal) | The February entry, reversed |
Source: Odoo 19.0 documentation, Deferred expenses, "Generate grouped deferral entries manually", amounts as Odoo presents them.
Three consequences follow, and they explain most of the confusion this mode causes:
- Each month's entry is cumulative. February's entry recognises two twelfths, not one, because January's entry was reversed on 1 February.
- The reversals are part of the method. Odoo says the calculation repeats every month until November, that no entry is needed in December, and that the reversals ensure bills A and B are recognised only once. Cancelling a reversal because it "looks like a duplicate" breaks the result.
- Between month-ends, the books show the full bill as an expense. This is our inference from the entries above, not a sentence in the documentation: once the reversal has posted on the first of the month, nothing defers the bill until the next Generate Entries. Month-end figures are right; a mid-month profit and loss report is not adjusted. If managers read reports mid-month, that is a reason to stay on the default mode.
Month-end checks
The deferral reports are the control. The documentation gives the paths Accounting → Reporting → Deferred Expense for expenses, and for revenues both Accounting → Review → Deferred Revenues and Accounting → Reporting → Deferred Revenue. The two revenue paths differ on the same documentation page, so look under both menus in your own database. Each report shows, per account, the deferral entries needed; click an account name and then Journal Items to see what is behind a figure.
A short routine that catches most problems:
- In grouped mode, Generate Entries has been clicked on both reports for the month.
- No deferral entry dated in the month is still in draft the day after month-end.
- The balance of the deferred expense account in the trial balance equals the amount the report shows as not yet recognised. Do the same for deferred revenue.
- Nothing sits in the Not Started column that should have started.
- Large bills for annual services posted this month have dates on their lines.
At year-end, Odoo's before-closure list asks you to book all depreciation and deferred revenue entries, and the Odoo 19 annual closing review includes a Deferred Entries check that start and end dates are set correctly on bills and invoices (year-end closing, read 10 November 2026).
What goes wrong, and how to spot it
The line has no dates. By our reading, the whole amount is then expensed in the bill's month, so the symptom is a spike in one expense account and no Deferred Entries smart button on the bill.
The period starts in a different month from the accounting date. Odoo's reports are built on the accounting date and include only documents whose accounting date falls before the end of the report period. Symptom: a document missing from the report for the month you expected or, by our reading, recognition that starts a month off.
A thirteenth entry appears. The basis is Months and the period started mid-month, so the first and last months are part months. Either accept it or use Full Months for new documents.
Entries are "stuck" in draft. Usually this is the daily server check and resolves itself within a day. If entries stay in draft for longer, look at whether the scheduled actions on your database are running.
The period was locked before the entries posted. Odoo's year-end page states that with a Lock Everything date, a new entry dated on or before the lock date has its accounting date set automatically to the day after it. By our reading, a deferral entry that had not posted when the period was locked would therefore land in the next period. Generate and post deferrals first, then lock.
The document changes after posting. A credit note, a corrected date or a bill reset to draft all raise the question of what happens to entries already generated. The two documentation pages do not describe these cases, so test each one on a duplicate database before you rely on it, and check the deferral report afterwards.
Where Odovation fits
Deferrals touch the chart of accounts, the journal structure, the lock-date routine and month-end reporting, so they are best decided together with those. Our Odoo accounting service can include setting up the deferral accounts and policy with your accountant, testing the calculation basis against your real contracts on a duplicate database, and writing the month-end routine down. If you are still before go-live, our Odoo implementation checklist orders the accounting settings by how hard each is to change later. To have an existing deferral setup or an unexplained balance on a deferred account reviewed, use our contact page.
Frequently Asked Questions
What is a deferred expense in Odoo?
A cost you have been billed for before receiving the goods or service, which Odoo also calls a prepayment or prepaid expense. Odoo holds it on a current asset account and recognises it as an expense over the period between the start and end dates you enter on the vendor bill line.
What is the difference between Months and Full Months?
Under Months, each full month gets an equal share and a part month is prorated by days. Under Full Months, any month that has started counts as a whole month, and the last month counts fully only if the period runs to its final day. A period that starts mid-month therefore needs an extra month's entry under Months and does not under Full Months.
Why are my deferred entries still in draft?
By our reading, entries dated in the future wait as drafts until their date. Odoo's server checks once a day whether an entry must be posted, so the move from Draft to Posted can take up to 24 hours after the entry's date.
Should I generate deferral entries on validation or manually?
On validation, unless the number of deferred documents makes per-document entries impractical. The default needs no monthly action and gives every bill and invoice its own schedule. Manually & Grouped produces one aggregated entry and one reversal per month, but someone must click Generate Entries on the report at every month-end.
Related Articles
How to Choose an Odoo Implementation Partner
Choose an Odoo implementation partner in five steps: read the partner directory properly, shortlist three firms, ask these questions, score the answers.
12 min readOdoo Customization: Studio vs Custom Modules
A decision guide for Odoo customization: six questions that tell you whether a requirement belongs in Studio or a custom module, and when to move.
11 min readOdoo Implementation Methodology: Discovery to Hypercare
An Odoo implementation methodology built on phase gates: what discovery, design, build, validation, cutover and hypercare must each produce, and who signs.
14 min read